HYPEREVM Buyback & burn on every trade

Every trade
feeds the pyre.

A pyre burns whatever it's given. $PYRE burns its own supply. Every buy and every sell pays a fee, and that fee buys $PYRE back from the pool and throws it on the fire. On-chain, permanently.

Buy $PYRE See the numbers
CA Revealed at launch — only trust pyre.life
Market cap—
Price—
Burned0%
ChartDexScreener ↗
Buy · Sell

Feed it directly.

Until graduation, $PYRE trades in its own Uniswap v4 pool on HyperEVM. Aggregators can't route to it yet, so this is where you trade. Your wallet talks straight to the official Uniswap contracts: nothing in between.

  • Phase—
  • Fee right now5%
  • Progress to graduation0%
Market cap—
Price—
Volume 24h—

The chart starts with the first trade.

Live from on-chain swaps · values in HYPE

You payBalance —
HYPE
You receiveBalance —
0.0 PYRE

Fee
5% of the HYPE side
Minimum received
—
Slippage

Selling takes up to 3 wallet confirmations the first time (2 one-off approvals). Always check the contract address on this page.

01 · The cycle

Every trade is fuel.

There is no "burn event" to wait for and no team wallet deciding when. The fire is wired into the pool itself. Trade, and the cycle runs.

01

Trade

Someone buys or sells $PYRE against HYPE in the pool.

02

Fee in HYPE

The pool takes 5% of the trade in HYPE (2% after graduation). No pile of tokens waiting to be dumped.

03

Buy back

The burn share of that HYPE buys $PYRE straight from the pool. Constant, mechanical buy pressure.

04

Burn

The bought tokens are burned by the token contract itself. Not parked in a dead wallet: erased from the total supply.

05

Deepen

A slice of every fee goes back into locked liquidity. Deeper pool, smaller supply, next trade.

AND AGAIN · FOREVER
02 · Tokenomics

A fixed amount of fuel. And it's burning.

One supply, minted once. One fee schedule, written in code: 5% at launch, 2% after graduation. Nothing hidden, nothing to unlock later.

Initial supply
1,000,000,000

The most $PYRE that will ever exist. The contract has no mint function, so nobody can create more. From here, the number can only go down.

Buy fee
5%

Paid in HYPE. 2% after graduation.

Sell fee
5%

Paid in HYPE. 2% after graduation.

Where each 5% goes · phase 1
✓

No mint function

1B minted once at deployment. The code can't create more. Ever.

✓

No blacklist, no pause

Nobody can freeze, block or pause your tokens. It isn't in the code.

✓

Liquidity can't be pulled

Locked in the pool, then locked forever on Project X. Nobody, us included, can withdraw it.

✓

Fees set in stone

5%, then 2%. Written in code, no function to raise them.

03 · Two phases

Kindling, then wildfire.

$PYRE starts in its own pool with a 5% fee, then moves, by code and in one transaction, to the biggest DEX on HyperEVM. The fire never stops: only the size of the stage changes.

PHASE 1 · AT LAUNCH

Kindling

Fee 5% in HYPE · Uniswap v4

  • Opens in its own Uniswap v4 pool with 100% of the supply. No team bag, no HYPE seeded.
  • The pool's hook takes 5% of every trade in HYPE (50% sliding to 5% in the first 10 minutes, against snipers).
  • 3.5% buys back and burns · 1% dev · 0.5% saved for liquidity.
  • Trade on this page: aggregators can't route to hook pools yet.
THE SWITCH

Graduation

At ~3,000 HYPE market cap

  • When the curve fills, trading pauses and a 3-minute countdown starts on this page.
  • Then anyone can trigger it. No admin, no vote.
  • In one transaction, all the liquidity moves to Project X at the same price.
  • The saved 0.5% becomes extra buy support. Unspent burn budget carries over.
  • Positions go to a locker that can only collect fees. Locked forever.
PHASE 2 · AFTER GRADUATION

Wildfire

Fee 2% · Project X

  • Trades on Project X, HyperEVM's largest DEX: visible to every aggregator, wallet and screener.
  • Every trade pays 2% to the locked liquidity.
  • Fees paid in $PYRE are burned on the spot. Fees paid in HYPE: 78% buys back and burns, 22% dev.
  • Lower fee, bigger stage, same fire.
04 · Under the hood

The fire lives in the pool, not in the token.

$PYRE is a standard ERC-20 on HyperEVM: no tax hidden in the token, nothing that can break a wallet or a bridge. The fee and the burn live where trading happens: at the pool.

IN
Your trade
On this page in phase 1, anywhere on HyperEVM after graduation.
POOL
HYPE / $PYRE
The pool takes its fee on every swap: 5% in HYPE, then 2%.
ENGINE
Burn keeper
Turns the fees into bought-back $PYRE and burns it. Every few minutes.
OUT
Less supply
Total supply drops. Every burn is a public transaction.
NO FEE DUMPS

Fees never get sold

Classic "tax tokens" collect their own token and dump it on the chart. Here, fees paid in HYPE only ever buy $PYRE, and fees paid in $PYRE (after graduation) are burned on the spot. None of it hits the market.

REAL BURN

Gone from the supply

Every burn goes through the token's own burn function, which lowers totalSupply on-chain. No "dead wallet" to trust: open the explorer and watch the total supply fall.

WALLET FRIENDLY

Transfers are free

Sending $PYRE to a friend, a CEX or a cold wallet costs nothing extra. Only trades through the pool feed the fire.

☀
Why HyperEVM? Blocks land every second and gas costs a fraction of a cent, so the keeper can burn small and often instead of saving up for a big, rare event. More burns, smaller, constant. A fire that never goes out.
05 · Burn tracker

Watch the supply turn to ash.

Read live from the token contract on HyperEVM every 15 seconds. No database, no screenshots: the chain is the scoreboard.

LIVE · ON-CHAIN
Total burned
0

0.0000% of the initial supply thrown on the pyre.

Current supply
1,000,000,000
Initial supply
1,000,000,000
Last updated
waiting for launch
Verify it yourself

Open the token on the explorer and check "Total supply". Every burn shows up as a transfer to the zero address from the keeper.

Open on explorer ↗
06 · FAQ

Questions, answered.

What is $PYRE?
A HyperEVM token whose supply shrinks every time it's traded. It launches in its own Uniswap v4 pool with a 5% fee in HYPE, then graduates to Project X with a 2% fee. In both phases the fees buy $PYRE back and burn it. More volume, more fire, less supply.
How exactly does the burn work?
Phase 1: the pool's hook keeps the fee in HYPE. A keeper calls buyback, which swaps the burn share for $PYRE and burns it in the same transaction. Phase 2: the locked Project X position earns 2% on every trade. Its $PYRE fees are burned as they are, its HYPE fees buy $PYRE that is then burned. Every burn goes through the token's burn function and lowers totalSupply, in public transactions you can check on the HyperEVM explorer.
Can the fee change?
No. The 5% of phase 1 is hard-coded in the hook (with the anti-snipe ramp at launch), and phase 2 uses the Project X 2% fee tier. None of the PYRE contracts has an owner or a function to raise a fee. The code is verified on the explorer so anyone can check.
Why is the fee higher at launch?
Anti-sniping. For the first 10 minutes the fee starts at 50% and slides down to 5%, so bots that rush the first block pay for it. Every bit of that fee still goes into the cycle. The keeper waits for the fee to settle before it starts buying back.
What is graduation?
When the market cap reaches about 350 HYPE, the curve is full: trading pauses and a 3-minute countdown starts on this page, so everyone knows exactly when $PYRE goes live on Project X. When it ends, anyone can call graduate() (the keeper does it within seconds). In a single transaction, all the liquidity leaves the v4 pool and is recreated at the same price in the Project X 2% pool, where it is locked forever. The 0.5% liquidity reserve becomes extra buy support, and any unspent burn budget carries over to phase 2. From then on, $PYRE trades on every HyperEVM aggregator and wallet.
Is the liquidity safe?
Yes. In phase 1 the whole HYPE/$PYRE liquidity sits in the v4 pool, and the hook has no function to withdraw it: the only way out is graduation. Graduation recreates it on Project X and hands the positions to a locker contract that can only collect fees. It has no withdraw and no transfer function. Nobody, us included, can pull the liquidity.
Do I pay the fee when I send tokens to someone?
No. $PYRE is a standard ERC-20. Wallet-to-wallet transfers are completely free of the fee. Only swaps through the pool pay it.
How do I buy?
Add HyperEVM to an EVM wallet (Rabby, MetaMask) and move some HYPE to HyperEVM (the Hyperliquid app can transfer it from your spot balance). Before graduation, use the swap on this page: the phase-1 pool runs on a Uniswap v4 hook that aggregators can't route to yet. After graduation, $PYRE trades on Project X and every HyperEVM aggregator. Always check the contract address against this site before you swap. Copycats will use the same name.
Add to the fire

The pyre never goes out.
Feed it.

Every trade, from now on, makes the supply a little smaller.

Buy $PYRE Follow on X
Copied